Frettlöh, V.: Diffusion welding: Greater variety in the manufacture of tool inserts. In: Der Stahlformenbauer, issue 1/2022, 39th year, Jan./Feb. 2022, pages 98–100

Frettlöh, V.: Cycle time reduction through corrosion-protected heat-conductive steels – SUCRE. In: Technology Afternoon KIMW, 03/2022, Lüdenscheid

Frettlöh, V.: Diffusion Welding: More variety in the production of tool inserts. In: Welding and Cutting 21 (2022) No. 1, pp. 18-19

Frettlöh, V.: Diffusion-bonded mold inserts expand the portfolio of injection molding tool manufacture. In: Antec 2022
Paskowski, A.: Development of a gas-based temperature control system for injection molds. In: Antec 2022

Schlutter, R.: Development of a non-destructive measurement method for quality assessment of foamed plastic parts. In: Antec 2022

Schlutter, R; Batmanov, A.: Zirconium dioxide as a thermo-insulating coating for molds in plastic injection molding. In: Antec 2022

Schlutter, R.: Functionalization of Engineering Plastics with Biocidal Nano-Particles. In: Antec 2022
Schlutter, R.; Rust, C.: GLIM: GLass fabric Insert Molding – Polymer Back-Injection of Glass Fabrics to increase strength. In: Antec 2022

Schlutter, R.: Improving part properties during Injection molding with 3D printed CO2 cooled plastic mold inserts. In: Antec 2022

Balster, A.: New process for manufacturing metal tool inserts. In: Der Schnitt- & Stanzwerkzeugbau 3/2022 p. 61
Balster, A.: Replicated Metal Molds: New process for manufacturing metal tool inserts for optical plastic components. In: Der Stahlformenbauer 3/2022 p. 94

Schlutter, R.; Frettlöh, V.: The use of novel biocidal nanoparticles in plastics technology. In: ThGOT: Theme Days on Boundary and Surface Technology and 13th Thuringian Biomaterials Colloquium, June 15, 2022, Zeulenroda

Kulkarni, A.: Tailor-made simulation. In: K-Profi Issue 1, 02/2021, p. 25

Frettlöh, V; Dietrich, K.: (In-mold marking) Electronic resume for every plastic product. In: Kunststoffe, 03/2021, pp. 56-58

Ciaston, M.; Batmanov, A.; Mumme, F.: Functionalization of tool surfaces by chemical vapor deposition. In: 9th NRW Nano-Conference, online, April 21-23, 2021

Frettlöh, V.; Mahmoud, M.; Zirmbardi, C.; Albach, R.: Circular economy today – chemistry, technology, economics. In: CHEManager 05/2021

Gehlen, M.: Nanostructuring: Nanostructuring provides advantages in demolding. In: K-Zeitung online, 05/2021

Frettlöh, V.: Strong against wear and deposits – multifunctional tool coatings. In: VDWF 11-Uhr-Loch, online, June 30, 2021

Militsch, M.; Leinwand, P.: Nanolight – Development of a glare-free headlight unit. In: Lighting Design Symposium 16, Lüdenscheid, June 30, 2021

Librizzi, A.: Technology and trends in lighting design. In: SPEED Congress Optics and Lighting, online, August 31, 2021

Ciaston, M.: New MOCVD coating systems for electrical insulation of tool surfaces. In: 5th EFDS Web Meeting, online, September 7, 2021

Frettlöh, V.: For more economical tools (coating of KIMW-F). In: DER KONSTRUKTEUR, 09/2021, p. 41

Militsch, M.: Back-injected OLEDs for lighting on control units. In: photonics Flashlight, 09/2021, pp. 16-19

Gehlen, M.: MOCVD is the new wear protection for tools. In: FAPU – Trade magazine for the polyurethane industry, 11/2021, pp. 38-40

Frettlöh, V.: Coatings for almost every application – Economical tools.
In: VDI-Z BD 163 (2021) No. 11/12

Frettlöh, V.; Kulkarni, A.: Simulating reality – reducing costs with customized simulation services. In: Isgatec Yearbook Sealing, Bonding, Polymers 2022

Frettlöh, V.: Diffusion welding: Greater variety in the manufacture of tool inserts. In: Schweißen und Schneiden 73 (2021) Issue 12, pp. 874-876

Rust, C.: GLIM: Glass fabric insert molding. In: Film Back Molding Symposium, Lüdenscheid, November 3, 2021

Rust, C.: GLIM: Glass fabric insert molding – polymer back injection of glass fabrics to increase strength. In: TECHNOMER 2021, online, December 8, 2021

Paskowski, A.; Schlutter, R.: Development of a gas-based temperature control system for injection molding tools – GasMold. In: TECHNOMER 2021, online, December 8, 2021

Frettlöh, V. et.al.: Diffusion-welded tool inserts expand the portfolio of injection mold tooling. In: TECHNOMER 2021 Conference Proceedings P1-10

Engemann, P.; Rath, I.: Passive temperature control for optical lamination of weld lines on molded parts. In: TECHNOMER 2021 Conference Proceedings P1-13

Schlutter, R.; Hins, S.: Improvement of component properties in injection molding with 3D-printed plastic tool inserts through innovative tool temperature control. In: TECHNOMER 2021 Conference Proceedings P1-14

Batmanov, A; Kibet, I. K.; Ditjo, P.; Wieser, J.: Investigation of the effect of thermal barrier layers on thin-walled injection molding applications. In: TECHNOMER 2021 Conference Proceedings P1-20

Batmanov, A; Frettlöh, V.; Mumme, F.; Kibet, I. K.; Ditjo, P.; Wieser, J: Zirconium dioxide as a thermally insulating coating for tools in plastic injection molding. In: TECHNOMER 2021 Conference Proceedings P1-21

Schlutter, R.; Paskowski, A. et.al.: Development of a non-destructive measurement method for quality assessment of foamed plastic components. In: TECHNOMER 2021 Conference Proceedings P8-7

Schlutter, R.: Transfer of measured p-v-T data from special plastics to the Schmidt equation. In: TECHNOMER 2021 Conference Proceedings P8-8

Schlutter, R.; Wiegand, C.; Tremel, W.: Functionalization of technical plastics with biocidal nanoparticles. In: TECHNOMER 2021 Conference Proceedings P8-9

Paskowski, A.; Schlutter, R.: Development of a gas-based temperature control system for injection molding tools – GasMold. In: TECHNOMER 2021 Conference Proceedings V1.19

Rust, C.: GLIM: GLas fabric Insert Molding – Polymer back injection molding of glass fabrics to increase strength. In: TECHNOMER 2021 Conference Proceedings V4-11

Ciaston, M.: Functionalization of tool surfaces.
In: EFDS Technical Committee Meeting FAFK, Dresden, February 5, 2020

Frettlöh, V.: Application of hard coatings using 3D-capable low-temperature CVD.
In: EFDS Workshop, Multifunctional protective coatings for tools and components, Chemnitz, February 26, 2020

Gehlen, M.: AbraCoat – Development of hard coatings for wear protection of 3D mold contours.
In: K-Impulse, 03/2020

Gehlen, M.: AbraCoat.
In: Magazine of the Hagen Chamber of Industry and Commerce, 03/2019

Prammer, K.: Process-integrated formation of decorative surfaces.
In: K-Impulse, 03/2020

Gehlen, M.: SUCRE coating with reduced thickness.
In: K-Impulse, 03/2020

Figge, T.: Functions mapped directly in the component.
In: K-Impulse, 03/2020

Frettlöh, V.: Ceramic MOCVD coatings for use in injection molding tools to influence thermal and demolding properties.
In: HTM – J. Heat Treatm. Mat., 04/2020

Schlutter, R.: Reduction of demoulding force through innovative surface modification.
In: SPE ANTEC, 04/2020

Schlutter, R.: Development of innovative biocidal nanoparticles for use in plastics technology.
In: SPE ANTEC, 04/2020

Schlutter, R.: Biocidal coating technologies.
In: Plastics in Medical Technology, Carl Hanser Verlag, 05/2020

Engemann, P.: HybridTemp.
In: Form und Werkzeug, 06/2020

Figge, T.: Metal-direct antenna.
In: plastverarbeiter, 06/2020

Balster, A.: BIOPLAQUE – New strategies against biocorrosion.
In: Der Stahlformenbauer, 06/2020

Schreiner; J.: FlamZation – Flame retardant.
In: K-Impulse, 09/2020

Rust, C.: InnoLab – Research doesn’t have to cost a lot.
In: K-Impulse, 09/2020

Mahmoud, M.: InfraSurf: Infrastructure can be further expanded,
In: K-Impulse, 09/2020

Balster, A.: BIOPLAQUE – New strategies against biocorrosion.
In: K-Impulse, 09/2020

Rust, C.: GLIM: New hybrid materials in the spotlight.
In: K-Impulse, 09/2020

Schlutter, R.: Application of biocidal materials in plastics technology.
In: Institute Colloquium of the Institute for Plastics Technology and Recycling e. V., Weissandt-Gölzau, 09/2020

Schlutter, R.: Biocidal surfaces in plastics technology.
In: Symposium – Innovative Surfaces. Lüdenscheid 09/2020

Frettlöh, V.: Tool coatings – Targeted protection for increased service life and extended maintenance intervals.
In: #Spotlight – Online Seminar, 10/2020

Librizzi, A.; Malecha, D.: Film decoration using digital printing – overview of the state of the art.
In: Symposium – Films+Vehicles, Düsseldorf, February 12, 2019

Mumme, F.: Injection molding without adhesion problems.
In: K-Zeitung online, February 2019

Mumme, F.: Injection molding tribometer analyzes adhesion between mold wall and molded part.
In: K-Aktuell, March 2019

Librizzi, A.: OLED meets film insert molding (DekOLED).
In: Südwestfälische Wirtschaft, 03/2019

Engemann, P.; Beck, C.: Material mix in toolmaking for ideal molded parts (HybridTemp).
In: VWDF im Dialog, Issue 1/2019

Engemann, P.: Weld seams for better temperature control (HybridTemp).
In: K-Impulse No. 74, 03/2019

Mumme, F.: Demolding of plastics.
In: FORM+WERKZEUG, 03/2019

Frettlöh, V.; Hinzpeter, U.; Et. al.: Development of highly stressed diffusion-welded components for toolmaking.
In: Welding and Cutting, 05/2019

Fornalczyk, G.: Wear protection for injection molding tools (Abracoat).
In: Der Stahlformenbauer, Issue 02/2019

Frettlöh, V.: Diffusion-welded tool inserts for injection molds.
In: Der Stahlformenbauer, Issue 02/2019

Engemann, P.: New possibilities for better temperature control.
In: Der Stahlformenbauer, Issue 03/2019

Engemann, P.: Improved temperature control even for the smallest molded parts.
In: Der Stahlformenbauer 01/2018

Fornalczyk, G.: Layer thickness determination using X-ray fluorescence analysis.
In: KIMW-F Annual Report 2017

Fornalczyk, G.: Development of a test bench for investigating the thermal conductivity of thin layers.
In: KIMW-F Annual Report 2017

Fornalczyk, G.: 3D-conform coatings of tool mold inserts by chemical vapor deposition.
In: KIMW-F Annual Report 2017

Fornalczyk, G.: Development of thermal barrier layers for plastics processing.
In: General Meeting of the Supporting Association, Lüdenscheid, March 8, 2018

Beck, C.: Alternative manufacturing process for optical lenses – CRoCoMold project.
Project flyer, April 9, 2018

Beck, C.: New ceramic 3D coating with short application times (3D FlameMold).
In: Konstruktion, April 2018

Engemann, P.: Welded tool cores for optimized temperature control.
In: K-Impulse No. 72, 04/2018

Frettlöh, V.: Process-reliable variothermal temperature control in large injection molding tools (DiffMold).
In: DER STAHLFORMENBAUER, 03/2018

Frettlöh, V.: Searching for clues – identifying errors before they occur.
In: Symposium on Plastic Electroplating, Lüdenscheid, May 17, 2018

Fornalczyk, G.: Introduction to coating technology,
In: Symposium on Tool Coating, Lüdenscheid, June 14, 2018

Fornalczyk, G.: Current research results and practical applications,
In: Tool Coating Symposium, Lüdenscheid, June 14, 2018

Fornalczyk, G.: Optimized efficiency through tool temperature control.
In: K-Impulse No. 73, August 2018

Es-Safyany, A.: MEDIMOLD: Direct injection in combination with thermosets and thermoplastics.
In: K-Impulse No. 73, 08/2018

Beck, C.: Liquid sprue-free production of optical components – Continuous Compression Molding (CCM) – an alternative to injection molding,
In: HASCO Open House, Lüdenscheid, September 26, 2018

Frettlöh, V.: High precision coatings for 3D mold contours in plastics production.
In: Technology Days of Günther Heißkanaltechnik GmbH, Frankenberg (Eder), September 26, 2018

Frettlöh, V.: Precision coatings for 3D mold contours in plastics processing.
In: Technology Days of Günther Heißkanaltechnik GmbH, Frankenberg (Eder), September 26, 2018

Kulkarni, A.; Frettlöh, V.: Simulation of CVD Process in a Reactor.
In: Comsol Conference, Lausanne, October 20, 2018

Frettlöh, V.; Günther, J.: The Sunday crime scene as a powerful driver of innovation (contamination spy).
In: K-Impulse No. 73, 09/2018

Sommer, M.: First-ever laser structuring of ceramic layers,
In. K-Impulse No. 73, 09/2018

Frettlöh, V.; Schmidt, J.: Tricky tool technology – tool development for the single-part production of 3D pump impellers.
In: FORM & WERKZEUG, 11/2018

Librizzi, A.: Process engineering strategies for preventing color washout during film back-molding and methods for predicting the occurrence of color washout.
In: 4th Working Group Meeting on Functional and Decorative Plastic Surfaces of the FGK e.V., Lüdenscheid, November 6, 2018

Hinzpeter, U.: ProPumpe – single-part demolding of injection-molded 3D pump impellers.
In: Technology Afternoon at the Plastics Institute in Lüdenscheid, January 26, 2017

Beck, C.: Hybrid temperature control for the smallest mold cores.
In: K-Impulse No. 69 (2017), p. 5

Beck, C.: New manufacturing process for slim, high-precision optics.
In: K-Impulse No. 69 (2017), p. 5

Frettlöh, V.: Innovative demolding technology for 3D pump impellers.
In: K-Impulse No. 69 (2017), p. 5

Fornalczyk, G.: Contour-accurate ceramic coatings for precision applications in plastics processing.
In: VDI Annual Conference on Injection Molding 2017, Baden-Baden, February 22, 2017

Fornalczyk, G.: Potential of CVD tool coatings for improving demolding properties.
In: Project meeting on surface treatment of plastic molded parts, Lüdenscheid, March 16, 2017

Fornalczyk, G.: 3D conformal deposition of protective ceramic layers on complex tools and injection molds via CVD.
In: DPG Spring Conference, Dresden, March 22, 2017

Fornalczyk, G.: 3D CVD – Coatings of complex geometries for plastics processing.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 12

Frettlöh, V.: RFID – Process for overmolding RFID tags.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 11

Frettlöh, V.: ProPumpe – Development of a novel demolding technique for injection molding tools for the single-part production of injection-molded 3D pump impellers.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 10

C.: CRoCoMold – Development of a manufacturing process for the alternative production of thin-walled precision plastic optics.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 15

Korres, M.: DGG – System – Development of a pyrotechnic pressure gas generation unit based on a nitrocellulose system to replace metal.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 16

Sommer, M.: Thin-film sensor technology – Processes and methods for process monitoring using thin-film sensor technology.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 13

Sommer, M.: KeraStruc – CVD layer development and analysis of the molding behavior of injection-molded plastics.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 18

Sommer, M.: Media tightness: Multilayer coating systems.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2016 (2016), p. 23

Sommer, M.: Iron-carbon diagram – Microstructure formation of steels and cast materials.
In: Seminar German Industry Forum – Heat Treatment of Metals, Bad Herrenalb, April 5, 2017

Fornalczyk, G.: Application areas significantly expanded: CVD coating of three-dimensional contours protects mold inserts.
In: VDWF im Dialog 02/2017, pp. 38-39

Librizzi, A.: And there was light. Possibilities for symbolic and ambient lighting with plastic molded parts.
In: Branchentreff Kunststoff Institut Lüdenscheid, May 18, 2017

Frettlöh, V.: 3D-conformal yttria-stabilized zirconia thin films via MOCVD for thermal barrier and protective applications in injection molding.
In: EURO CVD, Linköping, June 13, 2017

Fornalczyk, G.: Yttria-stabilized zirconia thin films via MOCVD for thermal barrier and protective applications in injection molding.
In: Key Engineering Materials Vol. 742, 2017, pp. 427-433

Fornalczyk, G.: Yttria-stabilized zirconia thin films via MOCVD for thermal barrier and protective applications in injection molding.
In: 21st Symposium on Composites, Bremen, July 6, 2017

Sommer, M.: Thin-film sensors successfully used in injection molding process.
In: Der Stahlformenbauer 6/2017, p. 103

Sommer, M.: KeraStruc.
In: Network meeting on precision free-form surfaces for optical applications, Lüdenscheid, March 23, 2017

Frettlöh, V.: RFID overmolding has great potential for the future.
In: K-Impulse No. 70 (2017), p. 5

Sommer, M.: Thin-film sensors successfully used in injection molding process.
In: K-Impulse No. 70 (2017), p. 5

Frettlöh, V.: Contamination Spy – Development of a simple method for detecting contamination on plastic surfaces.
In: Project meeting on surface treatment of plastic molded parts, Lüdenscheid, September 19, 2017

Frettlöh, V.: Smarter plastic components thanks to RFID technology.
In: Konstruktion – Technical section: Engineering Materials, 10-2017, IW4-IW6

Frettlöh, V., Günther, J.: Forensics meets plastics,
In: Kunststoffe 10/2017, pp. 113-117

Sommer, M.: Industry-oriented research,
In: Buderus Sales Meeting, Marburg, October 26, 2017

Sommer, M.: Iron-carbon diagram – Microstructure formation of steels and cast materials.
In: Seminar German Industry Forum – Heat Treatment of Metals, Krefeld, November 8, 2017

Fornalczyk, G.: Tool coatings using organometallic chemical vapor deposition to increase efficiency and service life in injection molding processes.
In: Technomer, Chemnitz, November 9, 2017

Frettlöh, V.: Development of a production technology for the automated integration of RFID tags in injection-molded plastic components made of thermoplastic and thermosetting materials.
In: Technomer, Chemnitz, November 9, 2017

Engemann, P.: Improved temperature control even for the smallest molded parts.
In: K-Impulse No. 71 (2017), p. 5

Librizzi, A.: Light-emitting diodes integrated directly into plastic components.
In: K-Impulse No. 71 (2017), p. 5

Beck, C., Frettlöh, V.: ProPumpe – Innovative SMEs (production),
In: Flyer as joint publication after project completion, Lüdenscheid, December 1, 2017.

Aamir, M.: Multi-physics simulation for calculating reciprocal process variables.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 17

Aamir, M.: KeraForm.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 14

Beck, C.: CRoCoMold.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 15

Beck, C.: Investigations into the prevention of surface marking on injection molded parts, ceramic inlays.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 18

Fornalczyk, G.: Automation of CVD technology for higher reproducibility of coating processes.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 21

Fornalczyk, G.: 3D CVD.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 12

Frettlöh, V.: ProPumpe.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 10

Frettlöh, V.: RFID.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 11

Librizzi, A.: Thin-film sensor technology.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 11

Mumme, F.: Pressure-stable insulation layers for resistive surface heating systems.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 19

Sommer, M.: Development of multilayer coating systems for the deposition of thermally insulating coatings with increased layer thickness.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2015 (2016), p. 20

Frettlöh, V.: Simulation technology supports coating development.
In: General Meeting of the Supporting Association of the Plastics Institute, Lüdenscheid, February 18, 2016

Fedosenko-Becker, T. N.; Dauerler, F.; Fornalczyk, G.; Mumme, F.: 3D conformal deposition of ceramic layers on complex metallic tools and injection molds via chemical vapor deposition.
In: 80th Annual Meeting of the DPG and DPG Spring Meeting, Regensburg, March 7, 2016

Aamir, M.: Process-accompanying simulation for multidisciplinary technologies.
In: K-Impulse 66 (2016), p. 5

Fornalczyk, G.: Surface treatment of injection molding tools: cleaning, stripping, post-treatment.
In: 3rd EFDS Workshop “Stripping,” Berlin, April 13, 2016

Librizzi, A.: Plastics for lighting applications.
In: Lichtforum.NRW – Information event, Arnsberg, May 3, 2016

Librizzi, A.: Temperature-sensitive thin films for use in injection molding tools for thermoplastic processing.
In: 18th GMA/ITG Symposium on Sensors and Measurement Systems, Nuremberg, May 10, 2016

Sommer, M.: Iron-carbon diagram – Microstructure formation of steels and cast materials.
In: Seminar on Heat Treatment of Metals, Ruhr District, May 19, 2016

Frettlöh, V.; Beck, C.; Figge, T.: Development and testing of a novel production technology for the fully automated integration of RFID technology into thermoplastic and thermosetting components.
In: VDI Report

Frettlöh, V.; Beck, C.; Figge, T.: Development and testing of a new production technology for the fully automated integration of RFID technology into thermoplastic and thermosetting components.
In: AUTOMATION 2016, Baden-Baden, June 8, 2016

Sommer, M.: Iron-carbon diagram – Microstructure formation of steels and cast materials.
In: Seminar German Industry Forum “Heat Treatment of Metals,” Bad Herrenalb, June 15, 2016

Librizzi, A.: Predetermination of color washout in film insert molding.
In: Working Group on Functional and Decorative Plastic Surfaces of the FGK e.V., Lüdenscheid, June 29, 2016

Mumme, A.: Thermal barrier coatings for achieving high-quality surfaces in thin-wall injection molding.
In: Working Group on Functional and Decorative Plastic Surfaces of the FGK e.V., Lüdenscheid, June 29, 2016

Librizzi. A.: Thin-film sensor technology for temperature measurement
In: Optence e.V. Technology Day, Lüdenscheid, July 8, 2016

Frettlöh, V.: Smarter plastic components through the use of RFID technology.
In: K-Impulse No. 67 (2016), p. 5

Korres, M.: “Pressure gas generator (DGG): Metal pressure cartridges for fire extinguishers soon to be made of plastic.
In: K-Impulse No. 67 (2016), p. 5

Sommer, M.: Multifunctional thin-film system.
In: K-Impulse No. 67 (2016), p. 5

Aamir, M.: Multi-physics simulation for multidisciplinary parameters.
In: K-Impulse No. 67 (2016), p. 9

Fornalczyk, G.: 3D conformal deposition of protective ceramic layers on complex tools and injection molds via CVD.
In: 3rd Plasma Surface Engineering 2016, Garmisch-Partenkirchen, September 13, 2016

Fornalczyk, G.: 3D-conformal CVD coatings of tool mold inserts.
In: Plastics Processing Germany (2016)

Librizzi. A.: Realization of symbol lighting on plastic surfaces.
In: 24th New Dresden Vacuum Technology Colloquium, Dresden, September 29–30, 2016

Fornalczyk, G.; Sommer, M.; Mumme, F.: 3D conformal deposition of protective ceramic layers on complex tools and injection molds via metal-organic chemical vapor deposition.
In: Poster K-Messe, Düsseldorf, 2016

Frettlöh, V.; Beck, C.; Hinzpeter, U.: Development of a new production technique for automated integration of RFID technology into plastic parts made of thermoplastic and thermosetting materials.
In: Poster K-Messe, Düsseldorf, 2016

Mumme, F.: Resistive surface heating.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2014 (2015), p. 14

Mausberg, S.: Surface analysis of molded parts.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2014 (2015), p. 12

Frettlöh, V.: Chemical vapor deposition for plastic processing tools.
In: Annual Report of the non-profit KIMW Forschungs-GmbH 2014 (2015), p. 10

Mumme, F.; Appel, T.; Etzkorn, J.: Prediction of the corrosion stability of injection molding tools.
In: JOT – Journal for Surface Technology (2015) 05, pp. 52–54

Mumme, F.: Thermal barrier coatings in plastics processing.
In: EFDS Symposium 16th Wörlitz Workshop “Insulation and barrier coatings for functional applications,” Location, June 15–16, 2015

Librizzi, A.: Temperature measurement in injection molds using thin-film sensor technology
In: Seminar: Liquid silicones in the injection molding process, Lüdenscheid, August 12, 2015

Librizzi, A.: Light & Plastics – Possibilities for the realization of symbolic lighting.
In: VDI Technical Conference: Automobile Cockpit, Stuttgart, September 8–9, 2015

Mumme, F.: Thermal barrier layers in plastics processing.
In: Hasco Technical Conference, Lüdenscheid, September 9, 2015

Frettlöh, V.: Investigation of the adhesion of PVD coatings to plastic surfaces.
In: 23rd New Dresden Vacuum Technology Colloquium, Dresden, October 12–15, 2015

Librizzi, A.: Basics of film back-spraying and error prevention.
In: Symposium: Film back injection, Lüdenscheid, November 11–12, 2015

Fornalczyk, G.: “3D CVD” improves the protection of component surfaces.
In: K-Impulse 65 (2015), p. 5

Librizzi, A.: Thin layers measure temperature and pressure in injection molding tools. In: K-Impulse 65 (2015), p. 5
Fornalczyk, G.: CVD coatings for tool and mold inserts.
In: VDI District Lenne: Plastics Technology Working Group, Lüdenscheid, November 24, 2015

Librizzi, A.: Light & decoration in a single shot.
In: KunststoffXtra (2015) 12, pp. 30–31

Atakan, B.; Khlopyanova, V.; Mausberg, S.; Mumme, F.; Kandzia, A.; Pflitsch, C.: Chemical vapor deposition and analysis of thermally insulating ZrO2 layers on injection molds.
In: Physica Status Solidi, C – Current Topics in Solid State Physics Vol. 12 (2015) 7, pp. 878–885

Bachelor thesis Niels Kitzhöfer

“Investigations into the rheological behavior of thermoplastics on thermally insulating tool coatings”

Supervisor: Michaela Sommer

Bachelor thesis Evaggelos Sidiropoulos

“Design and construction of a test bench for measuring the thermal conductivity of thermal barrier layers”

Supervisor: Gregor Fornalczyk

Bachelor thesis Nicolai Clemens

“Rapid tooling – development and testing of build-up strategies for printed plastic tool inserts”

Supervisor: Angelo Librizzi

Bachelor thesis Niklas Dörpinghaus

“Reduction of demolding problems – Article, material, and process-oriented design of the demolding system”

Supervisor: Angelo Librizzi

Bachelor thesis Lars Kaufhold

“Design of cover layers for composite material systems for the partial modification of thermal material properties in plastic processing tools”

Supervisor: Christoper Beck

Bachelor thesis Steffen Schack

“Preliminary investigations into the partial, dynamic temperature control of an injection molding tool”

Supervisor: Angelo Librizzi

Master thesis Martin Fuchs and Gregor Gabryl

“Printed Electronics”

Supervisor: Angelo Librizzi

Bachelor thesis Matthias Werner

“Verification of the mechanical load capacity of PVD-coated oxide ceramic coatings”

Supervisor: Frank Mumme

Bachelor thesis Dietrich Wartekin

“Design and commissioning of an operating test bench for investigating DLC-coated ejector standard parts”

Supervisor: Frank Mumme

Bachelor thesis Michael Wertschulte

“Testing the mechanical load capacity of oxide ceramic multilayer coatings”

Supervisor: Frank Mumme

Bachelor thesis Niklas Dörpinghaus

“Reducing demolding problems”

Supervisor: Angelo Librizzi

Bachelor thesis Tobias Neuhaus

“Development of a composite material system for partially modifying the thermal properties of materials in plastic processing tools”

Supervisor: Christopher Beck

Master’s thesis Claudia von Häfen

“Rapid tooling behavior of injection-molded plastic molded parts from three-dimensionally printed plastic tool inserts”

Supervisor: Angelo Librizzi

Master’s thesis Patrick Engemann

“Geometric and material design of composite material systems for the partial modification of thermal properties in plastic processing tools”

Supervisor: Christopher Beck